铯47D精细能级超冷里德堡原子自由演化的动力学研究

用连续窄线宽激光器将超冷铯里德堡原子分别激发到47D_3/2, 47D_5/2精细态, 观察了处于里德堡精细态的铯原子向超冷铯等离子体自由演化的过程, 详细对比了不同精细态的铯里德堡原子预电离时间、电离速率以及等离子体的转化效率. 将里德堡原子快速转化为等离子体的过程解释为局域势阱内由预电离产生的电子与里德堡原子的快速碰撞导致的雪崩电离.     

取向比对椭球气溶胶粒子散射特性的影响

利用T矩阵和离散坐标法研究了取向比对椭球粒子散射特性的影响, 计算了小尺度范围内椭球粒子的散射特征参量, 包括消光效率因子、不对称因子、单次散射反照率、散射相矩阵及双向反射函数(BRDF). 结果表明, 椭球粒子的散射特性与取向比密切相关, 粒子取向比会影响散射参量的振荡频率和振幅, 与球形粒子散射参量的相对差异也呈周期振荡趋势. 研究还发现, 某些特殊粒子尺寸的散射参量与粒子取向比基本无关. 在多次散射条件下, 分析不同取向比粒子群的BRDF随反射角和光学厚度的变化特性. 结果显示: 不同取向比粒子群的BRDF随反射角的变化趋势基本一致, 球形粒子群比非球形粒子群的BRDF曲线波动振幅更大; 球形-非球形粒子的BRDF相对差异随光学厚度和取向比的增大而减小, 随入射角的增大而增大.     

基于纯方位的浅海距离特征量解算分析

目标辐射噪声的LOFAR图中的干涉条纹包含了目标的运动参数和环境信息。当LOFAR图中的干涉条纹模糊或缺失时,其中的目标距离信息将无法提取。对于匀速直线运动的声源目标,仅利用方位信息,通过构造距离特征量和目标方位的关系模型,给出了一种浅海估计距离特征量的补充方法。浅海数值仿真和实验验证表明了该方法的可行性和有效性。     

Backscatter factor and absorption ratio of fibrous zirconia media in the visible

Fibrous thermal insulations are widely used to conserve energy in ambient to high temperature applications including buildings, solar collectors, heat exchangers, furnaces and thermal protection systems of reusable launch vehicles. It has long been recognised that zirconia has the lowest thermal conductivity of commercial refractories. The thermal conductivity of a zirconia fibrous medium is strongly dependent of its bulk density; high bulk densities of zirconia fibers provide the most effective insulation at high temperatures. Lee's theory for radiative transfer through fibrous media is used in this paper. The two-flux model is applied to determine the backward and forward parameters of a medium of zirconia fibers oriented in parallel planes. Theoretical calculations of the backscatter factor and absorption ratio of this medium are carried out in the visible spectrum for different size parameters of the fibers and for three different temperatures. Our results show that the backscatter factor of zirconia fibrous insulations is maximum, and therefore the heat transfer by the fibrous medium is the lowest, for a size parameter of 0.45 for all the temperatures studied. We also observed that the backscatter factor decreases with increasing temperature.     

Dynamic melt flow of nanocomposites based on poly-ɛ-caprolactam

 The dynamic flow behavior of polyamide-6 (PA-6) and a nanocomposite (PNC) based on it was studied. The latter resin contained 2 wt% of organoclay. The two materials were blended in proportions of 0, 25, 50, 75, and 100 wt% PNC. The dynamic shear rheological properties of well-dried specimens were measured under N₂ at T=240 °C, frequency ω=0.1–100 rad/s, and strains γ=10 and 40%. At constant T, γ, and ω the time sweeps resulted in significant increases of the shear moduli. The γ and ω scans showed a complex rheological behavior of all clay-containing specimens. At γ=10% the linear viscoelasticity was observed for all compositions only at ω>1 rad/s, while at γ=40% only for 0 and 25 wt% of PNC. However, the effect was moderate, namely decreasing G′ and G′′ (at ω=6.28 rad/s; γ=50%) by 15 and 7.5%, respectively. For compositions containing >25 wt% PNC two types of non-linearity were detected. At ω≤ω_c=1.4 ± 0.2 rad/s yield stress provided evidence of a 3-D structure. At ω > ω_c, G′ and G′′ were sensitive to shear history – the effect was reversible. From the frequency scans at ω > ω_c the zero-shear relative viscosity vs concentration plot was constructed. The initial slope gave the intrinsic viscosity from which the aspect ratio of organoclay particles, p=287 ± 9 was calculated, in agreement with the value calculated from the reduced permeability data, p=286. Received: 24 May 2001 Accepted: 27 August 2001     

A lattice boltzmann model for compressible perfect gas

A new lattice Boltzmann model for compressible perfect gas is proposed. The numerical example shows that it can be used to simulate shock wave and contact discontinuity. The results are comparable with those obtained by traditional methods. The ratio of specific heats γ may be chosen according to the requirement of problems. The project supported by the National Natural Science Foundation of China     

空洞敏感材料有限变形中的横向变形系数

讨论了空沿敏感韧性及超塑性材料由于变形损伤引起的体积膨胀，提出了弹塑性有限变形下表征体积膨胀特性的横向主形系数在各向同性损伤条件下的解析表达式。     

下承式梁拱组合桥梁的梁拱协作机理研究

文章将外部静定、内部高次超静定的梁拱组合桥梁分解成梁拱闭合体和吊杆两种构件,并且将吊杆力假定为膜张力,求解出了梁拱组合桥梁在均布荷载作用下拱肋分担的荷载大小及其修正系数,明确了其传力途径,定量地求出了梁拱分担的荷载比例,拱梁的拉压力偶矩大小以及梁拱截面的弯矩,并讨论了拱梁荷载比、弯矩比的影响因素及其关系,完整地揭示了下承式梁拱组合桥梁的梁拱协作机理.     

地震预报的新途径--加卸载响应比理论

从力学角度看,地震的孕育过程实质上是孕震区介质的损伤演化过程,这个过程主要是一个力学过程．但解决与地震预测有关的力学问题与工程中的力学问题有许多不同之处．通常力学问题的解决需要知道其本构关系、边界条件、初始条件以及某些力学量的变化历史(如流变)．但是在地震孕育过程中它们却是未知的或不完全知道的．人们知道的只是地壳中某些物理量的变化．由此提出了加卸载响应比作为一种地震预测的新途径,并简述了加卸载响应比的基本概念、实际应用及一些最新结果．     

钢轴心受压构件截面的直接计算法

根据钢结构设计原理，依据现行国家标准《钢结构设计规范》（ＧＢＪ１７ ８８），通过计算构件合适长细比λ，直接进行钢轴心受压构件截面尺寸设计．